Trash Chutes Sprinklers7147769

在2018年9月19日 (三) 00:09由GlyndaxcyemknjzrClogston (對話 | 貢獻)所做的修訂版本
(差異) ←上一修訂 | 最新修訂 (差異) | 下一修訂→ (差異)
跳轉到: 導覽, 搜尋

Chute Construction

Trash Chute Full Diagram Valiant Goods Inc. Elements are totally factory assembled with all joints welded or lock seamed. There is one slip joint per floor. All chutes have a flush interior and are assembled without bolts, rivets or clips protruding into the chute opening. Chutes are equipped with chute assistance clips pre-positioned at the factory to insure correct chute alignment. The adjustable intake door and frame are securely fastened to the intake throat. If needed, off-sets will be reinforced and supported in impact areas.

Material Valiant Products, Inc. chutes are constructed of 16 gauge regular aluminized steel, galvanized steel or stainless steel.

Sizes Valiant Products, Inc. chutes are available in 36″, 30″, and 24″ diameters. The standard chute size is 24″ per NFPA suggestions.

Intake Doors Valiant Products, Inc. U.L. “B” labeled self closing intake doors are constructed of 22 gauge polished stainless steel fronts and 18 gauge aluminized steel backs and wings. Each door is equipped with a chrome plated Tee handle with lock & two keys, fire rated latching mechanism and stainless steel pivot hinge.

Discharge Doors Two kinds of fire discharge doors are available from Valiant Products, Inc. The standard sliding discharge is spring loaded and assist open with a 155° U.L. approved fusible hyperlink. The sliding discharge is used for both trash & linen chutes when the material drops directly into a container. Hopper type discharge doors consist of a stainless steel “B” label constructed kind door held open by a 155° U.L. authorized fusible hyperlink. Hopper kind discharge doors are used when a 90° offset is required to go thru a wall.

Vents Valiant Products, Inc. vents are produced the exact same diameter as the chute and extend 3′ above the completed roof per NFPA suggestions. Vents are constructed of 22 gauge galvanized steel and are total with roof flashing and metal climate cap.

Sprinkler System Valiant Products, Inc. furnishes one (1) U.L. approved 1/2″, 155° automatic brass sprinkler head above the intake door of each chute total with a fitting for connection by a plumber. Depending on the number of floors and nearby fire codes, extra sprinkler heads are furnished on alternate reduce floors.

Flushing Head Valiant Goods, Inc. furnishes 1 (1) 1/2″ brass spray head, above the intake door of every chute, total with a fitting for connection by plumber.

laundry chute sprinklers